TRENDnet 12dBi User Manual page 67

TRENDnet User's Guide
Key Length
64-bit 10 characters
128-bit 26 characters
Key Index : key index is used to designate the WEP key during data

transmission. 4 different WEP keys can be entered at the same time, but
only one is chosen.
WEP Key # : Enter HEX or ASCII format WEP key value; the system

supports up to 4 sets of WEP keys.
WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system

accessing the network by using the WPA-PSK protected access.
Cipher Suite : Select the desired cipher suite from the drop-down list; the

options are AES and TKIP
Pre-shared Key : Enter the information for pre-shared key; the key can be

either entered as a 256-bit secret in 64 HEX digits format, or 8 to 63 ASCII
characters.
Profile List : The user can manage the created profiles for home, work or public

areas. Below depict an example for Profile List
© Copyright 2012TRENDnet. All Rights Reserved.
Hex ASCII
5 characters
13 characters
Click ""Edit" an exist profile on the Profile List. The field of System

Configuration and Security Policy will display profile's content. Edit profile's
content and then click "Save" button to save the profile.
Click "Delete" to remove profile.

Click and Select a profile from list, then click the "Connect" button to

connecting to the wireless network with the profile setting. After clicking
"Connect" button, the system should be jump to Remote AP Page, you can
verify connecting status on Remote AP Page.
Change these settings as described here and click Save button to save your changes.
Click Reboot button to activate your changes
TEW-676APBO
67