TRENDnet 12dBi User Manual page 78

TRENDnet User's Guide
The WAN port specified Dynamic IP, the Release and Renew button will be show-
up, click Release button to release IP address of WAN port, Renew button to renew
IP address through DHCP server.
The WAN port specified PPPoE or PPTP, and the Connect and DisConnect button
will be show up. Click "Connect" button to assigned IP address from PPPoE or PPTP
server, "DisConnect" button to release IP address of WAN port.
Mode : Supports Static, Dynamic, PPPoE and PPTP modes.

Reconnect Mode : The current reconnect mode of the PPPoE or PPTP.

MAC Address : The MAC address of the WAN port.

IP Address : The IP address of the WAN port.

IP Netmask : The IP netmask of the WAN port.

IP Gateway : The gateway IP address of the WAN port.

Primary DNS : The primary DNS server in service.

Secondary DNS : The secondary DNS server in service.

© Copyright 2012TRENDnet. All Rights Reserved.
LAN Information : Display total received and transmitted statistics on the LAN

interface.
MAC Address : The MAC address of the LAN port.

IP Address : The IP address of the LAN port.

IP Netmask : The IP netmask of the LAN port.

Receive bytes : The total received packets in bytes on the LAN port.

Receive packets : The total received packets of the LAN port.

Transmit bytes : The total transmitted packets in bytes of the LAN port.

Transmit packets : The total transmitted packets of the LAN port.

Wireless Information : Display the detailed receive and transmit statistics of

Wireless interface.
AP MAC Address : The MAC address of the Repeater AP.

Station MAC Address : The MAC address of the Wireless Client Station.

Channel : The current channel on the Wireless port.

AP Rate : The current Bit Rate on the Repeater AP.

TEW-676APBO
78