TRENDnet User's Guide
Show WDS Link
Peers MAC Address, antenna 0/1 received signal strength, phy mode and channel
bandwidth for each WDS are available.
MAC Address : Display MAC address of WDS peer.
Signal Strength ANT0/ANT1 : Indicate the signal strength of the respective WDS
links.
Phy Mode : Indicate the phy mode of the respective WDS linked.
BandWidth : Indicate the channel bandwidth of the respective WDS linked.
MCS : Indicate the MCS of the respective WDS linked.
SGI : Indicate the SGI (Short Guard Interval) of the respective WDS linked. "1"
indicate the Short Guard Interval, "0" indicate the Long Guard Interval.
© Copyright 2012TRENDnet. All Rights Reserved.
Extra Info
Users could pull out information such as Route table, ARP table, MAC table, Bridge table
or STP available in the drop-down list from system. The "Refresh" button is used to
retrieve latest table information.
TEW-676APBO
121