Configure Ddns Setup; Configure Lan Setup - TRENDnet 12dBi User Manual

TRENDnet User's Guide

Configure DDNS Setup

Dynamic DNS allows you to map domain name to dynamic IP address.
Please click on System -> DDNS Setup and follow the below setting.
Enabled: By default, it's "Disable". The mapping domain name won't change when

dynamic IP changes. The beauty of it is no need to remember the dynamic WAP IP
while accessing to it.
Service Provider: Select the preferred Service Provider from the drop-down list

including dyndns, dhs, ods and tzo
Hostname: Host Name that you register to Dynamic-DNS service and export.

User Name & Password: User Name and Password are used to login DDNS service.

Click Save button to save your changes. Click Reboot button to activate your changes.
© Copyright 2012TRENDnet. All Rights Reserved.

Configure LAN Setup

Here are the instructions for how to setup the local IP Address and Netmask.
Please click on System -> LAN and follow the below setting.
LAN IP : The administrator can manually setup the LAN IP address.

IP Address : The IP address of the LAN port; default IP address is

192.168.2.254
IP Netmask : The Subnet mask of the LAN port; default Netmask is

255.255.255.0
DHCP Setup : Devices connected to the system can obtain an IP address

automatically when this service is enabled.
DHCP : Check Enable button to activate this function or Disable to deactivate

this service.
Start IP / End IP: Specify the range of IP addresses to be used by the DHCP

server when assigning IP address to clients. The default range IP address is
192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
DNS1 IP : Enter IP address of the first DNS server; this field is required.

DNS2 IP : Enter IP address of the second DNS server; this is optional.

WINS IP : Enter IP address of the Windows Internet Name Service (WINS)

TEW-676APBO
41