Hp Proliant Servers (Rack); Hp Proliant Rack Servers (Intel® Xeon®); Hp Proliant Dl160 G6 Server - HP Cluster Platform Cabling Tables v2010 Overview

HP ProLiant servers (rack)

HP ProLiant Rack Servers (Intel® Xeon®)
Several Intel® Xeon® servers are supported in HP Cluster Platform solutions. This section presents information
for the HP ProLiant servers that are used in HP Cluster Platform solutions only. The content in this section
includes the following additional information for the ProLiant Intel® Xeon® servers:
•
Front and rear views
•
InfiniBand HCA PCI slot assignment
•
Specific cable management instructions, if necessary
•
HP Cluster Platform specific maintenance instructions, if applicable

HP ProLiant DL160 G6 Server

The HP ProLiant DL160 G6 Server is used as a control node, a utility node, and a compute node in HP Cluster
Platform configurations.
HP ProLiant DL160 G6 Server documentation
For server-specific information, see the server documentation:
•
For a complete list of features and specifications, see the HP ProLiant DL160 Generation 6 (G6)
QuickSpecs on the HP website
(http://h18004.www1.hp.com/products/quickspecs/13247_na/13247_na.html).
•
For installation and service information, see the HP ProLiant DL100 Series Server User Guide and the HP
ProLiant DL160 G6 Server Maintenance and Service Guide on the HP website
(http://www.hp.com/support/manuals).
Under servers, select ProLiant ML/DL and TC series servers, and then select HP ProLiant DL160 G6
Server series.
Front panel components (DL160 G6)
This figure shows the LFF hard drive model. The server is also available in a two-drive LFF model, a four-drive
non-hot plug LFF model, and an 8-drive SFF model. Each model contains the same components in the same
or similar orientations.
HP ProLiant servers (rack) 6