Interconnect Module Bay Numbering; Port Mapping: Hp Bladesystem C7000 Enclosure Interconnect Module Bay To Server Blade - HP Cluster Platform Cabling Tables v2010 Overview

Interconnect module bay numbering

Always install interconnect modules in the appropriate interconnect bays to support network connections for
specific signals.
Server blade signal
NICs 1, 2, 3, and 4
(embedded)
Mezzanine 1
Mezzanine 2
Mezzanine 3
For interconnect-specific information, see the documentation that ships with the interconnect module.
Port mapping: HP BladeSystem c7000 Enclosure interconnect
module bay to server blade
The following table maps the server blade embedded NICs and mezzanine port slot assignments for the
different server blade types to the enclosure interconnect module bays.
Interconnect
bay
1
2
3
4
5
Interconnect bay
number
1, 2
3, 4
5, 6 and then 7, 8
7, 8 and then 5, 6
Double-density
Single-density
half-height server half-height server
blade blade (Server A)
NIC 1 (embedded) NIC 1 (embedded)
NIC 2 (embedded) —
Mezzanine slot 1, NIC 2 (embedded)
port 1
Mezzanine slot 1, —
port 1
Mezzanine slot 2, Mezzanine port 1
Interconnect bay label
Double-density
half-height server
blade (Server B)
—
NIC 1 (embedded)
—
NIC 2 (embedded)
—
Single-density
full-height server
blade
NIC 3 (embedded)
NIC 1 (embedded)
NIC 4 (embedded)
NIC 2 (embedded)
Mezzanine slot 1,
port 1
Mezzanine slot 1,
port 1
Mezzanine slot 2,
HP ProLiant BL c-Class Server Blades 67