Hp Proliant Dl1000 Multi Node Servers - HP Cluster Platform Cabling Tables v2010 Overview

Rear panel LEDs and buttons (DL160 G6)
The figure shown in this section is a non-hot-plug power supply model. The HP ProLiant DL160 G6 Server is
also available in a hot-plug power supply model.
Item Description
NIC link LED
1
NIC activity LED
2
UID button/LED
3
Dedicated
4
management
connector activity
LED (optional)
Dedicated
5
management
connector link LED
(optional)
PCI expansion slot definitions (DL160 G6)
Always install an InfiniBand PCIe HCA in slot 1 of this server.
Slot
1
1
2

HP ProLiant DL1000 Multi Node Servers

The DL1000 consists of up to four independent DL170h G6 servers in the 2U HP ProLiant h1000 G6 Chassis
and is available in 2-node and 4-node models. Only the 4-node model (HP ProLiant DL4x170h G6 Server)
of the HP ProLiant DL170h G6 Server is supported in the HP Cluster Platform.
Status
Green = Linking at 100 Mbps speed
Off = No connection or linking at 10 Mbps speed
Green = LAN is linking.
Flashing green = LAN is active.
Off = No connection
Blue = Identification
Flashing blue = System is being managed
remotely.
Off = Off
Green = LAN is linking.
Flashing green = LAN is active.
Off = No connection
Green = Linking at 100 Mbps speed
Off = No connection or linking at 10 Mbps speed
Type Length
PCIe2 Full
Optional PCI-X Full
PCIe Half
Connector Interconnect
x16 x16
133 MHz/3.3 V 64 bit
x16 x4
HP ProLiant servers (rack) 9