Peer Route-Update-Interval - HP 6125XLG Command Reference Manual

[Sysname-bgp-vpn1] ipv6-family unicast
[Sysname-bgp-ipv6-vpn1] peer test route-policy test-policy export
Related commands
filter-policy export
•
filter-policy import
•
peer as-path-acl
•
peer filter-policy
•
• peer prefix-list
route-policy
•

peer route-update-interval

Use peer route-update-interval to specify an interval for sending the same update to a peer or peer
group.
Use undo peer route-update-interval to restore the default.
Syntax
peer { group-name | ip-address | ipv6-address } route-update-interval interval
undo peer { group-name | ip-address | ipv6-address } route-update-interval
Default
The interval for sending the same update to an IBGP peer is 15 seconds and the interval for sending the
same update to an EBGP peer is 30 seconds.
Views
BGP view, BGP-VPN instance view
Predefined user roles
network-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer
group must have been created.
ip-address: Specifies a peer by its IP address. The peer must have been created.
ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created.
interval: Specifies a minimum interval for sending the same update message. The range is 0 to 600
seconds.
Usage guidelines
A BGP router sends an update message to its peers when a route is changed. If the route changes
frequently, the BGP router sends many updates for the route, resulting in routing flaps. By configuring the
interval for sending the same update to a peer or peer group, you can avoid such routing flaps.
Examples
# In BGP view, specify the interval for sending the same update to peer group test as 10 seconds.
<Sysname> system-view
[Sysname] bgp 100
301