Cost-Style - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Use undo circuit-cost to remove the configuration.
Syntax
circuit-cost value [ level-1 | level-2 ]
undo circuit-cost [ level-1 | level-2 ]
Default
No global link cost is configured.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
value: Specifies the link cost value. The value range varies by cost style.
For styles narrow, narrow-compatible, and compatible, the cost value is in the range of 0 to 63.
For styles wide and wide-compatible, the cost value is in the range of 0 to 16777215.
level-1: Applies the link cost to Level- 1 .
level-2: Applies the link cost to Level-2.
Usage guidelines
If no level is specified, the specified cost applies to both Level- 1 and Level-2.
Examples
# Set the global Level- 1 link cost of IS-IS process 1 to 1 1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] circuit-cost 11 level-1
Related commands

cost-style

isis cost
cost-style
Use cost-style to set a cost style.
Use undo cost-style to restore the default.
Syntax
cost-style { narrow | wide | wide-compatible | { compatible | narrow-compatible } [ relax-spf-limit ] }
undo cost-style
Default
Only narrow cost style packets can be received and sent.
Views
IS-IS view
136

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents