Silent-Interface(Ospfv3 View) - HP 6125XLG Command Reference Manual

Use undo preference to restore the default.
Syntax
preference [ ase ] [ route-policy route-policy-name ] preference
undo preference [ ase ]
Default
The preference for OSPFv3 internal routes is 10, and that for OSPFv3 external routes is 150.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
ase: Sets a preference to OSPFv3 external routes. If the keyword is not specified, the command sets a
preference for OSPFv3 internal routes.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters, to set a preference for matching routes.
preference: Specifies the preference of OSPFv3, in the range of 1 to 255. The smaller the value, the
higher the preference.
Usage guidelines
If multiple routing protocols find multiple routes to the same destination, the router uses the route found by
the protocol with the highest preference.
Examples
# Set a preference of 150 for OSPFv3 routes.
<Sysname> system-view
[Sysname] OSPFv3
[Sysname-OSPFv3-1] preference 150

silent-interface(OSPFv3 view)

Use silent-interface to disable the specified interface from receiving and sending OSPFv3 packets.
Use undo silent-interface to restore the default.
Syntax
silent-interface { interface-type interface-number | all }
undo silent-interface { interface-type interface-number | all }
Default
An interface can receive and send OSPFv3 packets.
Views
OSPFv3 view
Predefined user roles
network-admin
389