HP 6125XLG Command Reference Manual page 293

Views
BGP IPv4 unicast instance view, BGP-VPN IPv4 unicast instance view, BGP IPv6 unicast instance view,
BGP-VPN IPv6 unicast instance view
Predefined user roles
network-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer
group must have been created.
ip-address: Specifies a peer by its IP address. The peer must have been created.
ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created.
Usage guidelines
Executing the peer enable command in different views enables BGP to exchange routing information for
the corresponding address families with the specified peer.
• In BGP IPv4 unicast instance view, the command enables the capability to exchange IPv4 unicast
routing information, and adds the learned routes to the BGP routing table of the public network.
In BGP-VPN IPv4 unicast instance view, the command enables the capability to exchange IPv4
•
unicast routing information, and adds the learned routes to the BGP routing table of the specified
VPN instance.
In BGP IPv6 unicast instance view, the command enables the capability to exchange IPv6 unicast
•
routing information, and adds the learned routes to the IPv6 BGP routing table of the public
network.
In BGP-VPN IPv6 unicast instance view, the command enables the capability to exchange IPv6
•
unicast routing information, and adds the learned routes to the IPv6 BGP routing table of the
specified VPN instance.
The undo peer enable command disables BGP to exchange routing information for the corresponding
address family with the peer.
Examples
# In BGP IPv4 unicast instance view, enable BGP to exchange IPv4 unicast routing information with peer
1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family unicast
[Sysname-bgp-ipv4] peer 1.1.1.1 enable
# In BGP-VPN IPv4 unicast instance view, enable BGP to exchange IPv4 unicast routing information with
peer 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] ipv4-family unicast
[Sysname-bgp-ipv4-vpn1] peer 1.1.1.1 enable
# In BGP IPv6 unicast instance view, enable BGP to exchange IPv6 unicast routing information with peer
1::1.
<Sysname> system-view
[Sysname] bgp 100
282