Apply Local-Preference - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Syntax
apply isis { level-1 | level-1-2 | level-2 }
undo apply isis
Default
No IS-IS level is set.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
level-1: Redistributes routes into IS-IS Level- 1 .
level-1-2: Redistributes routes into both IS-IS Level- 1 and Level-2.
level-2: Redistributes routes into IS-IS Level-2.
Examples
# Configure node 10 in permit mode for routing policy policy1 to redistribute routes that have a tag of
8 to IS-IS level-2.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
[Sysname-route-policy-policy1-10] apply isis level-2

apply local-preference

Use apply local-preference to set a local preference for BGP routes.
Use undo apply local-preference to restore the default.
Syntax
apply local-preference preference
undo apply local-preference
Default
No local preference is set for BGP routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
preference: Specifies a local preference in the range of 0 to 4294967295.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a local preference of 130 for routes
matching AS path list 1.
421

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents