Lsdb-Overflow-Interval; Lsa-Generation-Interval - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] lsa-arrival-interval 200
Related commands

lsa-generation-interval

lsdb-overflow-interval

Use lsdb-overflow-interval to configure the interval that OSPF exits overflow state.
Use undo lsdb-overflow-interval to restore the default.
Syntax
lsdb-overflow-interval interval
undo lsdb-overflow-interval
Default
The OSPF exit overflow interval is 300 seconds.
Views
OSPF view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval that OSPF exits overflow state, in the range of 0 to 2147483647 seconds.
Usage guidelines
When the number of LSAs in the LSDB exceeds the upper limit, the LSDB is in an overflow state. In this
state, OSPF does not receive any external LSAs and deletes the external LSAs generated by itself to save
system resources.
You can configure the interval that OSPF exits overflow state. An interval of 0 indicates that the timer is
not started and OSPF does not exit overflow state.
Examples
# Configure the OSPF exit overflow interval as 10 seconds.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] lsdb-overflow-interval 10
lsa-generation-interval
Use lsa-generation-interval to configure the OSPF LSA generation interval.
Use undo lsa-generation-interval to restore the default.
Syntax
lsa-generation-interval maximum-interval [ minimum-interval [ incremental-interval ] ]
undo lsa-generation-interval
105

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents