HP 6125XLG Command Reference Manual page 411

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Predefined user roles
network-admin
Parameters
acl6-number: Specifies an IPv6 ACL by its number in the range of 2000 to 3999 to filter redistributed
routes.
prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters, to filter the redistributed routes.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters, to filter redistributed routes.
protocol: Filters routes redistributed from the specified routing protocol, which can be bgp4+, direct,
isisv6, ospfv3, ripng, or static. If no protocol is specified, the command filters routes redistributed from all
routing protocols.
process-id: Specifies a process by its ID in the range of 1 to 65535. This argument is available only when
the protocol is isisv6, ospfv3, or ripng.
Usage guidelines
This command filters routes redistributed by the ipv6 import-route command. Only routes that have not
been filtered can be redistributed.
If no protocol is specified, the command filters routes redistributed from all routing protocols.
If a protocol is specified, the command filters routes redistributed from the specified routing protocol.
To reference an advanced ACL (with a number from 3000 to 3999) in the command or in the routing
policy, configure the ACL using one of the following methods:
To deny/permit a route with the specified destination, use the rule [ rule-id ] { deny | permit } ipv6
source sour sour-prefix command.
To deny/permit a route with the specified destination and prefix, use the rule [ rule-id ] { deny |
permit } ipv6 source sour sour-prefix destination dest dest-prefix command.
The source keyword specifies the destination address of a route and the destination keyword specifies the
prefix of the route. The specified prefix must be valid. Otherwise, the configuration does not take effect.
Examples
# Use IPv6 ACL 2006 to filter redistributed routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 filter-policy 2006 export
# Configure IPv6 ACL 3000 to permit only route 2001::1/128 to pass. Use the ACL to filter redistributed
routes.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] isis 1
[Sysname-isis-1] ipv6 filter-policy 3000 export
400

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents