Display Rip Database; Display Rip Interface - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

display rip database

Use display rip database to display active routes for a RIP process. RIP advertises active routes in RIP
routing updates.
Syntax
display rip process-id database
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Examples
# Display active routes for RIP process 100.
<Sysname> display rip 100 database
1.0.0.0/8, cost 0, auto-summary
1.1.1.0/24, cost 16, interface summary
1.1.1.0/24, cost 0, nexthop 1.1.1.1, RIP-interface
1.1.2.0/24, cost 0, imported
2.0.0.0/8, cost 1, auto-summary
2.0.0.0/8, cost 1, nexthop 1.1.1.2
Table 9 Command output
Field
cost
auto-summary
interface summary
nexthop
RIP-interface
imported

display rip interface

Use display rip interface to display RIP interface information for a RIP process.
Syntax
display rip process-id interface [ interface-type interface-number ]
Views
Any view
Description
Cost of the route.
Indicates that the route is a RIP automatic summary route.
Indicates that the route is a RIP interface summary route.
Address of the next hop.
Direct route on a RIP-enabled interface.
Indicates that the route is redistributed from another routing protocol.
34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents