HP 6125XLG Command Reference Manual page 44

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Number of routes changes: 1
Number of replies to queries: 0
Table 8 Command output
Field
Public VPN-instance name/Private VPN-instance
name
RIP process
RIP version
Preference
Checkzero
Default cost
Summary
Host routes
Update time
Timeout time
Suppress time
Update output delay
Output count
Garbage-collect time
Silent interfaces
Default routes
Default routes cost
Verify-source
Networks
Configured peers
Triggered updates sent
Number of routes changes
Number of replies to queries
Description
Public network or VPN where the RIP process runs.
RIP process ID.
RIP version 1 or 2.
RIP preference.
Indicates whether the zero field check is enabled for
RIPv1 messages.
Default cost of redistributed routes.
Indicates whether route summarization is enabled.
Indicates whether to receive host routes.
RIP update interval.
RIP timeout time.
RIP suppress interval.
RIP packet sending interval.
Maximum number of RIP packets sent at each interval.
RIP garbage collection interval.
Number of silent interfaces, which do not periodically
send updates.
Indicates whether a default route is sent to RIP
neighbors.
only—Only a default route is advertised.
originate—A default route is advertised along with
other routes.
disable—No default route is advertised.
Metric for a default route.
Indicates whether the source IP address is checked for
received RIP routing updates.
Networks enabled with RIP.
Configured neighbors.
Number of triggered updates sent.
Number of route changes.
Number of RIP responses.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents