Using Hp Pcm+ To Update Switch Software - HP Switch 2800 Series Management And Configuration Manual

Hide thumbs Also See for Switch 2800 Series:

Table of Contents

File Transfers

Downloading Switch Software

If you do not specify either a primary or secondary flash location for the

destination, the download automatically goes to primary flash.

For example, to download switch software from secondary flash in a switch

with an IP address of 10.28.227.103 to the secondary flash in the destination

switch, you would execute the following command in the destination switch's

Figure A-6. Switch-to-Switch, from Either Flash in Source to Either Flash in

Using HP PCM+ to Update Switch Software

HP ProCurve Manager Plus include a software update utility for updating on

HP ProCurve switch products. For further information, refer to the Getting

Started Guide and the Administrator's Guide, provided electronically with

the application.