HP 6125XLG Command Reference Manual page 232

Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 52 Command output
Field
Peer
Local
Type
remote router ID
BGP current state
Up for
BGP current event
BGP last state
Port
Configured
Received
Negotiated
Peer optional capabilities
Peer support BGP route AS4
capability
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between
advertisements
Optional capabilities
Peer Preferred Value
BFD
Description
IP address of the peer.
Local router ID.
BGP connection type between the local router and the peer:
•
IBGP link—IBGP connection.
•
EBGP link—EBGP connection.
Router ID of the peer.
Current state of the BGP session between the local router and the peer.
Lasting time of the BGP session.
Current event of the BGP session between the local router and the peer.
Previous state of the BGP session.
TCP port numbers of the local router and its peer.
Timers configured on the local router in seconds, including the holdtime
(Active Hold Time) and keepalive interval (Keepalive Time).
Received timer (configured on the peer) in seconds, including the
holdtime (Active Hold Time).
Negotiated timers in seconds, including the holdtime (Active Hold Time)
and keepalive interval (Keepalive Time).
Optional capabilities supported by the peer.
The peer supports 4-byte AS number.
IPv4 unicast address family capability: Routes of the address family can
be advertised and received.
Total numbers of received messages and updates.
Total numbers of sent messages and updates.
Maximum number of routes allowed to learn from the peer.
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates alarm messages.
Minimum route advertisement interval in seconds.
Optional capabilities supported by the local end.
Preferred value specified for the routes from the peer.
Indicates whether BFD is enabled to detect the link to the BGP peer.
221