Default; Default-Cost (Ospf Area View) - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

default

Use default to configure default parameters for redistributed routes.
Use undo default to remove the configuration.
Syntax
default { cost cost | tag tag | type type } *
undo default { cost | tag | type } *
Default
The cost is 1, the tag is 1, and the route type is 2.
Views
OSPF view
Predefined user roles
network-admin
Parameters
cost cost: Specifies the default cost for redistributed routes, in the range of 0 to 16777214.
tag tag: Specifies the tag for marking redistributed routes, in the range of 0 to 4294967295.
type type: Specifies the type for redistributed routes: 1 or 2.
Examples
# Configure the default cost, tag, and type as 10, 100, and 2 for redistributed external routes.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default cost 10 tag 100 type 2
Related commands
import-route

default-cost (OSPF area view)

Use default-cost to configure a cost for the default route advertised to the stub or NSSA area.
Use undo default-cost to restore the default value.
Syntax
default-cost cost
undo default-cost
Default
The cost is 1.
Views
OSPF area view
Predefined user roles
network-admin
64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents