Ripng Commands; Checkzero; Default Cost - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

RIPng commands

checkzero

Use checkzero to enable the zero field check on RIPng packets.
Use undo checkzero to disable the zero field check.
Syntax
checkzero
undo checkzero
Default
The zero field check function is enabled.
Views
RIPng view
Predefined user roles
network-admin
Usage guidelines
Some fields in RIPng packet headers must be zero. These fields are called "zero fields." You can enable
zero field check on incoming RIPng packets. If a zero field of a packet contains a non-zero value, RIPng
does not process the packet.
Examples
# Disable zero field check on RIPng packets for RIPng 100.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] undo checkzero

default cost

Use default cost to configure a default metric for redistributed routes.
Use undo default cost to restore the default.
Syntax
default cost value
undo default cost
Default
The default metric of redistributed routes is 0.
Views
RIPng view
331

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents