Ospf Bfd Enable - HP 6125XLG Command Reference Manual

[Sysname-ospf-100-area-0.0.0.1] network 131.119.0.0 0.0.255.255
[Sysname-ospf-100-area-0.0.0.1] authentication-mode md5
[Sysname-ospf-100-area-0.0.0.1] quit
[Sysname-ospf-100] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf authentication-mode md5 15 plain 123456
# Enable simple authentication for the network 131.1 19.0.0/16 in Area 1. Set the plaintext key to 123456
on Ethernet 1/1.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] network 131.119.0.0 0.0.255.255
[Sysname-ospf-100-area-0.0.0.1] authentication-mode simple
[Sysname-ospf-100-area-0.0.0.1] quit
[Sysname-ospf-100] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf authentication-mode simple plain 123456
Related commands
authentication-mode

ospf bfd enable

Use ospf bfd enable to enable BFD on an OSPF interface.
Use undo ospf bfd enable to disable BFD on an OSPF interface.
Syntax
ospf bfd enable [ echo ]
undo ospf bfd enable
Default
BFD for OSPF is disabled.
Views
Interface view
Predefined user roles
network-admin
Parameters
echo: Enables BFD single-hop echo detection. Without this keyword, this command enables BFD
bidirectional control detection.
Usage guidelines
Do not use OSPF FRR and BFD for OSPF at the same time. Otherwise, OSPF FRR might fail to take effect.
Examples
# Enable BFD for OSPF on VLAN-interface 1 1.
<Sysname> system-view
[Sysname] ospf
112