Field
SOURCE
NLPID
AREA ADDR
INTF ADDR
INTF ADDR V6
NBR ID
IP-Internal
IP-External
IP-Extended
COST
Auth
IPV6
IPV6-Ext
display isis name-table
Use display isis name-table to display the host name to system ID mapping table.
Syntax
display isis name-table [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Displays the host name to system ID mapping table for an IS-IS process specified by its ID in
the range of 1 to 65535.
Examples
# Configure a name RUTA for the local IS system.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name RUTA
# Map the host name RUTB to the system ID 0000.0000.0041 of a remote IS.
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
# Display the IS-IS host name to system ID mapping table.
[Sysname-isis-1] display isis name-table
---------------------------------------------------------------
Description
System ID of the originating router.
Network layer protocol the originating router runs.
Area address of the originating router.
IP address of the originating router's IS-IS interface.
IPv6 address of the originating router's IS-ISv6 interface.
Neighbor ID of the originating router.
Internal IP address and mask of the originating router.
External IP address and mask of the originating router.
Extended IP address and mask of the originating router.
Cost.
Authentication information of the originating router.
Internal IPv6 address and prefix of the originating router.
External IPv6 address and prefix of the originating router.
Name table information for ISIS(1)
146