Display Ospf Error - HP 6125XLG Command Reference Manual

Field
Sum-Net
Sum-Asbr
External
NSSA
Opq-Link
Opq-Area
Opq-As
LSA originated
LSA Received
Routing Table
Intra Area
Inter Area
ASE

display ospf error

Use display ospf error to display OSPF error information.
Syntax
display ospf [ process-id ] error
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If no process is specified, this command displays OSPF error information for all OSPF processes.
Examples
# Display OSPF error information.
<Sysname> display ospf error
0 : OSPF Router ID confusion
0 : OSPF bad version
0 : OSPF bad area ID
OSPF Process 1 with Router ID 192.168.1.112
OSPF Packet Error Statistics
Description
Number of Type-3 LSAs originated.
Number of Type-4 LSAs originated.
Number of Type-5 LSAs originated.
Number of Type-7 LSAs originated.
Number of Type-9 LSAs originated.
Number of Type-10 LSAs originated.
Number of Type-11 LSAs originated.
Number of LSAs originated.
Number of LSAs received.
Routing table information.
Intra-area route number.
Inter-area route number.
ASE route number.
0 : OSPF bad packet
0 : OSPF bad checksum
0 : OSPF drop on unnumbered interface
74