Ospfv3 Bfd Enable; Ospfv3 Cost - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 1 area 1 instance 1

ospfv3 bfd enable

Use ospfv3 bfd enable to enable BFD on an OSPFv3 interface.
Use undo ospfv3 bfd enable to disable BFD on an OSPFv3 interface.
Syntax
ospfv3 bfd enable [ instance instance-id ]
undo ospfv3 bfd enable [ instance instance-id ]
Default
BFD for OSPFv3 is disabled.
Views
Interface view
Predefined user roles
network-admin
Parameters
instance-id: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
Usage guidelines
BFD provides a mechanism to quickly detect the connectivity of links between OSPFv3 neighbors,
improving the convergence speed of OSPFv3.
OSPFv3 uses BFD to implement bidirectional control detection.
Examples
# Enable BFD on VLAN-interface 1 1 in instance 1.
<Sysname> system-view
[Sysname] interface vlan-interface 11
[Sysname-Vlan-interface11] ospfv3 bfd enable instance 1

ospfv3 cost

Use ospfv3 cost to configure an OSPFv3 cost for an interface in an instance.
Use undo ospfv3 cost to restore the default.
Syntax
ospfv3 cost value [ instance instance-id ]
undo ospfv3 cost [ instance instance-id ]
Default
The cost is 1 for a VLAN interface, is 0 for a loopback interface, and is computed according to the
interface bandwidth for other interfaces.
381

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents