HP 6125XLG Command Reference Manual page 88

Interface: 40.4.0.1 (Vlan-interface40)
Restarter state: Normal
Neighbor count of this interface: 1
Neighbor IP address
3.3.3.3 40.4.0.3
Virtual-link Neighbor-ID
Restarter state: Normal
Interface: 20.2.0.1 (Vlink)
Transit Area: 0.0.0.1
Neighbor IP address
4.4.4.4 20.2.0.4
Table 18 Command output
Field
OSPF Process 1 with Router ID 1.1.1.1
Graceful Restart information
Graceful Restart capability
Graceful Restart support
Helper capability
Helper support
State: DR Type: Broadcast
GR state
Normal
-> 4.4.4.4, Neighbor-State: Full
GR state
Normal
Description
GR information for OSPF process 1 with router ID 1.1.1.1.
Indicates whether GR is enabled:
•
•
•
GR modes that the process supports (the modes are
displayed only when GR is enabled):
•
•
•
•
Helper capability that the process supports:
•
•
•
•
Displays policies that the Helper supports (the policies are
displayed only when Helper is enabled):
•
•
•
77
Last Helper exit reason
None
Last Helper exit reason
Reset neighbor
Enable(IETF)—IETF GR is enabled.
Enable(Nonstandard)—Non-IETF GR is enabled.
Disable—GR is disabled.
Planned and un-planned—Supports both planned and
unplanned GR.
Planned only—Supports only planned GR.
Partial—Supports partial GR.
Global—Supports global GR.
Enable (IETF)—Supports IETF GR Helper capability.
Enable (Nonstandard)—Supports non IETF GR Helper
capability.
Enable (IETF and nonstandard)—Supports both IETF
GR Helper capability and non IETF GR Helper
capability.
Disable—Does not support GR Helper capability.
Strict lsa check—The Helper supports strict LSA
checking.
Planned and un-planned—The Helper supports
planned and unplanned GR.
Planned only—The Helper supports only planned GR.