Display Ospf Request-Queue - HP 6125XLG Command Reference Manual

Table 25 Command output
Field
Area ID
Down
Attempt
Init
2-Way
ExStart
Exchange
Loading
Full
Total

display ospf request-queue

Use display ospf request-queue to display OSPF request queue information.
Syntax
display ospf [ process-id ] request-queue [ interface-type interface-number ] [ neighbor-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
neighbor-id: Specifies a neighbor's router ID.
Usage guidelines
If no OSPF process is specified, this command displays the OSPF request queue information for all OSPF
processes.
If no interface is specified, this command displays the OSPF request queue information for all interfaces.
If no neighbor is specified, this command displays the OSPF request queue information for all OSPF
neighbors.
Examples
# Display OSPF request queue information.
<Sysname> display ospf request-queue
Description
The state statistics information of all the routers in the area to which the router belongs
is displayed.
Number of neighboring routers in Down state in the same area.
Number of neighboring routers in Attempt state in the same area.
Number of neighboring routers in Init state in the same area.
Number of neighboring routers in 2-Way state in the same area.
Number of neighboring routers in ExStart state in the same area.
Number of neighboring routers in Exchange state in the same area.
Number of neighboring routers in Loading state in the same area.
Number of neighboring routers in Full state in the same area.
Total number of neighbors under the same state: Down, Attempt, Init, 2-Way, ExStart,
Exchange, Loading, or Full.
87