HP 6125XLG Command Reference Manual page 236

Field
Configured
Received
Negotiated
Peer optional capabilities
Peer support BGP route AS4
capability
Address family IPv6 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between
advertisements
Optional capabilities
Peer Preferred Value
BFD
Routing policy configured
# Display log information about BGP IPv6 unicast peer 1::2 for the public network.
<Sysname> display bgp peer ipv6 1::2 log-info
Peer : 1::2
Date Time
22-Nov-2011 09:31:12 Up
Table 56 Command output
Field Description
Peer IP address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
Description
Timer configured on the local router in seconds, including the holdtime
(Active Hold Time) and keepalive interval (Keepalive Time).
Received timer (configured on the peer) in seconds, including the
holdtime (Active Hold Time).
Negotiated timer in seconds, including the holdtime (Active Hold Time)
and keepalive interval (Keepalive Time).
Optional capabilities supported by the peer.
The peer supports 4-byte AS number.
IPv6 unicast address family capability: Routes of the address family can
be advertised and received.
Total numbers of received messages and updates.
Total numbers of sent messages and updates.
Maximum number of routes allowed to learn from the peer.
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates alarm messages.
Minimum route advertisement interval in seconds.
Optional capabilities supported by the local end.
Preferred value specified for the routes from the peer.
Indicates whether BFD is enabled to detect the link to the specified BGP
peer.
Routing policy configured for the peer.
If no routing policy is specified, this field displays No routing policy is
configured.
State Notification
Error/SubError
225