Rip Summary-Address - HP 6125XLG Command Reference Manual

Syntax
rip split-horizon
undo rip split-horizon
Default
The split horizon function is enabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
The split horizon function prevents routing loops. If you want to disable the function, make sure that
•
the operation is dispensable.
If both split horizon and poison reverse are enabled, only the poison reverse function takes effect.
•
Examples
# Enable the split horizon function on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip split-horizon

rip summary-address

Use rip summary-address to configure RIPv2 to advertise a summary route on an interface.
Use undo rip summary-address to remove the configuration.
Syntax
rip summary-address ip-address { mask | mask-length }
undo rip summary-address ip-address { mask | mask-length }
Default
RIPv2 does not advertise a summary route.
Views
Interface view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address of the summary route.
mask: Specifies the subnet mask of the summary route, in dotted decimal notation.
mask-length: Specifies the subnet mask length of the summary route, in the range of 0 to 32.
Usage guidelines
This command takes effect only when automatic route summarization is disabled.
54