Examples
# Display redistributed IPv4 routing information.
<Sysname> display isis redistribute 1
Type IPv4 Destination
--------------------------------------------------------------------------------
D
192.168.30.0/24
D
11.11.11.11/32
D
10.10.10.0/24
Table 40 Command output
Field
Route information for IS-IS(1)
Level-1 IPv4 Redistribute Table
Level-2 IPv4 Redistribute Table
Type
IPV4 Destination
IntCost
ExtCost
Tag
State
display isis route
Use display isis route to display IS-IS IPv4 routing information.
Syntax
display isis route [ ipv4 [ ip-address mask-length ] ] [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
Views
Any view
Predefined user roles
network-admin
Route information for IS-IS(1)
------------------------------
Level-1 IPv4 Redistribute Table
--------------------------------
IntCost
ExtCost
0
0
0
0
0
0
150
Tag
State
Active
Description
IS-IS process of the redistributed routing information.
Redistributed IPv4 routing information of IS-IS Level-1.
Redistributed IPv4 routing information of IS-IS Level-2.
Redistributed route type:
•
Direct.
•
IS-IS.
•
Static.
•
OSPF.
•
BGP.
•
RIP.
IPv4 destination address.
Internal cost of the route.
External cost of the route.
Tag value.
Indicates whether the route is valid.