HP 6125XLG Command Reference Manual page 234

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters.
ipv6-address: Specifies a peer by its IPv6 address.
log-info: Displays log information.
verbose: Displays detailed information.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command displays BGP IPv6 unicast peer or peer group
information for the public network.
Usage guidelines
If no parameter is specified, the command displays brief information about all BGP IPv6 unicast peers.
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display brief information about all BGP IPv6 unicast peers for the public network.
<Sysname> display bgp peer ipv6
BGP local router ID: 192.168.1.135
Local AS number: 100
Total number of peers: 4
Peer
1::1
3::3
Table 54 Command output
Field
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display detailed information about BGP IPv6 unicast peer 1::2 for the public network.
Peers in established state: 1
AS
MsgRcvd
MsgSent OutQ PrefRcv Up/Down
600
9
600
0
Description
IP address of the peer.
AS number of the peer.
Number of messages received.
Number of messages sent.
Number of messages to be sent.
Number of prefixes received.
Lasting time of the current BGP session state.
Current state of the BGP session between the local router and the peer.
223
9
0
0 00:05:12 Established
0
0
0 00:03:16 Connect
State

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents