If no neighbor is specified, this command displays retransmission queue information for all neighbors.
Examples
# Display OSPF retransmission queue information.
<Sysname> display ospf retrans-queue
The Router's Neighbor is Router ID 2.2.2.2
Interface 10.1.1.1
Retransmit list:
Type
Router
Network
Sum-Net
Table 27 Command output
Field
The Router's Neighbor is Router ID
Address
Interface
Area
Retrans List
Type
LinkState ID
AdvRouter
Sequence
Age
display ospf routing
Use display ospf routing to display OSPF routing information.
Syntax
display ospf [ process-id ] routing [ ip-address { mask | mask-length } ] [ interface interface-type
interface-number ] [ nexthop nexthop-address ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
ip-address: Specifies a destination IP address.
Area 0.0.0.0
LinkState ID
AdvRouter
2.2.2.2
2.2.2.2
12.18.0.1
2.2.2.2
12.18.1.0
2.2.2.2
Address 10.1.1.2
Sequence
80000004
80000003
80000002
Description
Neighbor router ID.
Neighbor interface IP address.
Interface address of the router.
Area ID.
Retransmission list.
LSA type.
Link state ID.
Advertising router.
LSA sequence number.
LSA age.
89
Age
1
1
2