Table 90 Command output
Field
Virtual-link Neighbor-ID
Neighbor-State
Interface
Cost
State
Type
Transit Area
Timers
filter (OSPFv3 area view)
NOTE:
This command is available only on an ABR.
Use filter to configure inbound/outbound Inter-Area-Prefix-LSA filtering on an ABR.
Use undo filter to remove the configuration.
Syntax
filter { acl6-number | prefix-list prefix-list-name | route-policy route-policy-name } { export | import }
undo filter { export | import }
Default
Inter-Area-Prefix-LSAs are not filtered.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
acl6-number: Specifies an IPv6 ACL by its number in the range of 2000 to 3999 to filter
inbound/outbound Inter-Area-Prefix-LSAs.
prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters, to
filter inbound/outbound Inter-Area-Prefix-LSAs.
route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters, to
filter inbound/outbound Inter-Area-Prefix-LSAs.
export: Filters Inter-Area-Prefix-LSAs advertised to other areas.
import: Filters Inter-Area-Prefix-LSAs advertised into the local area.
Description
ID of the neighbor on the virtual link.
Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, or Full.
IP address and name of the local interface on the virtual link.
Interface route cost.
Interface state.
Virtual link.
Transit area ID. (This field is displayed when a virtual link is present on the
interface.)
Values of OSPFv3 timers (in seconds): hello, dead, and retransmit, and
interface transmission delay.
370