Ospf Timer Retransmit; Ospf Trans-Delay - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Examples
# Set the poll timer interval on VLAN-interface 10 to 130 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf timer poll 130
Related commands
ospf timer hello

ospf timer retransmit

Use ospf timer retransmit to set the LSA retransmission interval on an interface.
Use undo ospf timer retransmit to restore the default.
Syntax
ospf timer retransmit interval
undo ospf timer retransmit
Default
The LSA retransmission interval is 5 seconds on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Specifies the LSA retransmission interval in the range of 1 to 3600 seconds.
Usage guidelines
After sending an LSA, an interface waits for an acknowledgement packet. If the interface receives no
acknowledgement within the retransmission interval, it retransmits the LSA.
Set a proper retransmission interval to avoid unnecessary retransmissions.
Examples
# Set the LSA retransmission interval to 8 seconds on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf timer retransmit 8

ospf trans-delay

Use ospf trans-delay to set the LSA transmission delay on an interface.
Use undo ospf trans-delay to restore the default.
Syntax
ospf trans-delay seconds
undo ospf trans-delay
119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents