Display Ripng Route - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Field
Poison-reverse
MetricIn/MetricOut
Default route
Default route cost

display ripng route

Use display ripng route to display all RIPng routes for a RIPng process.
Syntax
display ripng process-id route
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
Examples
# Display routing information for RIPng process 100.
<Sysname> display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::20C:29FF:FE7A:E3E4 on Vlan-interface12
Destination 1::/64,
via FE80::20C:29FF:FE7A:E3E4, cost 1, tag 0, A, 7 secs
Destination 2::2/128,
via FE80::20C:29FF:FE7A:E3E4, cost 1, tag 0, A, 7 secs
Table 75 Command output
Field
A–Aging
S–Suppressed
Description
Indicates whether the poison reverse function is enabled:
On—Enabled.
Off—Disabled.
Additional metric to incoming and outgoing routes.
Only—The interface advertises only a default route.
Originate—The interface advertises a default route and
other RIPng routes.
Off—In this state, the interface does not advertise a default
route.
In garbage-collect status—In this state, the interface
advertises a default route with a metric of 16.
Cost of the default route.
Description
The route is in aging state.
The route is in suppressed state.
335

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents