I/O Interface Settings - Agilent Technologies InfiniiVision 4000 X-Series User Manual

This chapter explains oscilloscope utility functions.

I/O Interface Settings

The oscilloscope can be accessed and/or controlled remotely via these I/O
interfaces:
• USB device port on the rear panel (square shaped USB port).
• LAN interface on the rear panel.
To configure the I/O interfaces:
1 On the oscilloscope's front panel, press [Utility].
2 In the Utility Menu, press I/O.
3 In the I/O Menu, press Configure.
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
20
Utility Settings
I/O Interface Settings
Setting up the Oscilloscope's LAN Connection
File Explorer 331
Setting Oscilloscope Preferences
Setting the Oscilloscope's Clock
Setting the Rear Panel TRIG OUT Source
Setting the Reference Signal Mode
Performing Service Tasks
Configuring the [Quick Action] Key
s1
327
333
336
337
337
340
345
328
327