To Save Lister Data Files - Agilent Technologies InfiniiVision 4000 X-Series User Manual

• The horizontal time/div (sweep speed) setting. At faster settings, fewer
• When saving to a CSV format file, the maximum number of data points
When necessary, the Length control performs a "1 of n" decimation of the
data . For example: if the Length is set to 1000, and you are displaying a
record that is 5000 data points in length, four of each five data points will
be decimated, creating an output file 1000 data points in length.
When saving waveform data, the save times depend on the chosen format:
Data File Format
BIN
ASCII XY
CSV
See Also
•
•
•

To save Lister data files

Lister data files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
4 Finally, press the Press to Save softkey.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
data points appear on the display.
is 64K.
"Binary Data (.bin) Format"
"CSV and ASCII XY files"
"Minimum and Maximum Values in CSV Files"
Lister data file.
navigate to the save location. See
page 315.
In the File Settings Menu, you have these softkeys and options:
Setup Info — when enabled, setup information (vertical, horizontal,
•
trigger, acquisition, math, and display settings) is also saved in a
separate file with a TXT extension.
Save/Email/Recall (Setups, Screens, Data)
Save Times
fastest
medium
slowest
on page 375
on page 382
"To navigate storage locations"
on page 383
on
18
313