Making Voltage Measurements Automatically - Agilent Technologies 54622A User Manual

Making voltage measurements automatically

Math measurements
Only Peak-Peak, Maximum, Minimum, Average, and X at Max automatic
measurements may be made on a math FFT function. See "Making time
measurements automatically" for the FFT X at Max measurement. Use the cursors
to make other measurements on FFT. All voltage measurements may be made on
other math functions. The resultant units are:
FFT: dB (decibels)
1 * 2: V2 (Volts-squared)
1 – 2: V (Volts)
dV/dt: V/s (Volts/second)
∫ Vdt:
Vs (Volt-seconds)
The following figure shows the voltage measurement points.
Maximum
Digital channel voltage measurements
Automatic voltage measurements are not valid on digital channels on the mixed-
signal oscilloscope.
Making voltage measurements automatically
Amplitude
Peak-Peak
Making Measurements
Top
Base
Minimum
5- 41