What Next - Dell PowerConnect W-Airwave User Manual

Table 21 AMP Setup > Roles > Add/Edit Roles Fields and Default Values (Continued)
Setting
AP/Device
Access Level
Top Folder
RAPIDS
VisualRF
Helpdesk
Enable Adobe
Flash
Allow creation
of Guest Users

What Next?

Go to additional tabs in the AMP Setup section to continue additional setup configurations.

Complete the required configurations in this chapter before proceeding.

Dell PowerConnect W-AirWave | User Guide
Default Description
None Defines the privileges the role has over the viewable APs. AMP supports three privilege levels,
as follows:
Manage (Read/Write)—Manage users can view and modify devices and Groups. Selecting

this option causes a new field, Allow authorization of APs/Devices, to appear on the page,
and is enabled by default.
Audit (Read Only)—Audit users have read only access to the viewable devices and Groups.

Audit users have access to the APs/Devices > Audit page, which may contain sensitive
information including AP passwords.
Monitor (Read Only)—Monitor users have read-only access to devices and groups and

VisualRF. Monitor users cannot view the APs/Devices > Audit page which may contain
sensitive information, including passwords.
None Defines the Top viewable folder for the role. The role is able to view all devices and groups
contained by the Top folder. The top folder and its subfolders must contain all of the devices in
any of the groups it can view.
NOTE: AMP enables user roles to be created with access to folders within multiple branches of
the overall hierarchy. This feature assists non-administrator users who support a subset of
accounts or sites within a single AMP deployment, such as help desk or IT staff.
User roles can be restricted to multiple folders within the overall hierarchy, even if they do not
share the same top-level folder. Non-administrator users are only able to see data and users for
devices within their assigned subset of folders.
None Sets the RAPIDS privileges, which are set separately from the APs/Devices. This field specifies
the RAPIDS privileges for the role, and options are as follows:
None— Cannot view the RAPIDS tab or any Rogue APs.

Read Only—The user can view the RAPIDS pages but cannot make any changes to rogue

APs or perform OS scans.
Read/Write—The user may edit individual rogues, classification, threat levels and notes,

and perform OS scans.
Administrator—Has the same privileges as the Read/Write user, but can also set up RAPIDS

rules, override scores, and is the only user who can access the RAPIDS > Setup page.
None Sets the VisualRF privileges, which are set separately from the APs/Devices, for this role.
Options are as follows:
Read Only—The user can view the VisualRF pages but cannot make any changes to floor

plans.
Read/Write—The user may edit individual floor plans, buildings, and campuses.

No Sets the role to support helpdesk users, with parameters that are specific to the needs of
helpdesk personnel supporting users on a wireless network.
Yes Enables the Adobe Flash application for all users who are assigned this role. Adobe Flash
supports interactive graphics on the Home > Overview page, VisualRF, Quickview functions, the
Radio Statistics page for thin AP radios, and additional AMP pages.
NOTE: This field is only visible if a specific flag is set in the AMP database. By default this option
is hidden and Flash is enabled for all users.
Yes If this option is enabled, users with an assigned role of Monitoring or Audit can be given access
to guest user account creation along with the option to allow a sponsor to change its username.
A custom message can also be included. The Guest User Preferences section does not apear if
Guest User Configuration is disabled in AMP Setup > General.
Configuring AMP | 47