Printing A Bill Of Materials Report - Dell PowerConnect W-Airwave User Manual

3. Enter the following information:


NOTE: The starting floor will add one to the highest floor in the building and the ending floor defaults to 10 more than the starting
floor.
4. Select OK to save your changes.
5. Manually refresh page and your is redirected to the VisualRF > Floor Plan page. The Building view will
reflect the new floors.
NOTE: You should see all replicate floors with matching number of access points.

Printing a Bill of Materials Report

You can generate a Bill of Materials Report from within VisualRF in Word format. Follow these steps:
1. Navigate back to the Network view.
2. Right select Campus icon and select Show Bill of Materials. A generating report popup appears.
3. Select options such as heatmap, data rate, sensor coverage, wired range, and summary.
4. Select OK. A BOM report appears in Microsoft Word as illustrated in
Figure 40 Bill of Materials Report Illustration
Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
Starting and ending floors
Select the toggles to copy walls, regions, data rates, and AP placement
Figure 40:
Planning and Provisioning | 43