Disable Sflow; Show Sflow - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide

73-11 disable sflow

Description
This command is used to disable the sFlow function on the Switch.
Format
disable sflow
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Disable the sFlow globally:
DGS-3120-24TC:admin# disable sflow
Command: disable sflow
Success.
DGS-3120-24TC:admin#

73-12 show sflow

Description
This command is used to show the sFlow information.
sFlow Address: The IPv4 address associated with this agent.
sFlow State: The current state of the sFlow agent.
Format
show sflow
Parameters
None.
Restrictions
None.
662