D-Link DGS-3120-24PC Manual page 375

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
all - Specify that all the addresses in the database that the system has auto learned and blocked
to be displayed.
vlan_name - Specify the name of the VLAN to which the blocked MAC address belongs.
<vlan_name> - Enter the VLAN name used.
mac_address - Specify the MAC address of the entry or the blocked MAC address.
<macaddr> - Enter the MAC address of the entry or the blocked MAC address.
Restrictions
None.
Example
To show the IMPB entries that are blocked:
DGS-3120-24TC:admin#show address_binding blocked all
Command: show address_binding blocked all
VID VLAN Name
---- -------------------------------- ----------------- ----
1 default
Total Entries : 1
DGS-3120-24TC:admin#
36-8 show address_binding ip_mac
Description
This command is used to display the IMPB entries.
Format
show address_binding ip_mac [all | [[ipaddress <ipaddr>] {mac_address <macaddr>} |
mac_address <macaddr>]]
Parameters
all - Specify that all the IP addresses to be displayed.
ipaddress - Specify the learned IP address of the entry in the database.
<ipaddr> - Enter the learned IP address.
mac_address - (Optional) Specify the MAC address of the entry in the database.
<macaddr> - Enter the MAC address here.
mac_address - Specify the MAC address of the entry in the database.
<macaddr> - Enter the MAC address here.
Restrictions
None.
MAC Address
00-0C-6E-AA-B9-C0 1:1
371
Port