D-Link DGS-3120-24PC Manual page 395

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
39-4 show jwac
Description
This command is used to display the JWAC configuration settings.
Format
show jwac
Parameters
None.
Restrictions
None.
Example
To display the current JWAC configuration:
DGS-3120-24TC:admin#show jwac
Command: show jwac
State
Enabled Ports
Virtual IP/URL
Virtual IPv6/URL
Switch HTTP Port
UDP Filtering
Forcible Logout
Redirect State
Redirect Delay Time
Redirect Destination
Quarantine Server
Quarantine Server IPv6
Q-Server Monitor
Q-Server Error Timeout
RADIUS Auth-Protocol
RADIUS Authorization
Local Authorization
Function Version
DGS-3120-24TC:admin#
39-5 enable jwac redirect
Description
This command is used to enable JWAC redirect. When redirect quarantine_server is enabled,
the unauthenticated host will be redirected to a quarantine server when it tries to access a random
: Disabled
:
: 0.0.0.0/-
: ::/-
: 80 (HTTP)
: Enabled
: Enabled
: Enabled
: 1 Seconds
: Quarantine Server
:
:
: Disabled
: 30 Seconds
: PAP
: Enabled
: Enabled
: 2.11
391