Show Fdb - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#show multicast_fdb
Command: show multicast_fdb
VLAN Name : default
MAC Address : 01-00-5C-11-22-33
Egress Ports : 1:1-1:5
Mode : Static
Total Entries: 1
DGS-3120-24TC:admin#

32-10 show fdb

Description
This command is used to display the current unicast MAC address forwarding database.
Format
show fdb {[port <port> | vlan <vlan_name 32> | vlanid <vidlist> | mac_address <macaddr> |
static | aging_time | security]}
Parameters
port - (Optional) Displays the entries for a specified port.
<port> - Enter the port number here.
vlan - (Optional) Displays the entries for a specific VLAN. The maximum name length is 32.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Displays the entries for the VLANs indicated by VID list.
<vidlist> - Enter the VLAN ID list here.
mac_address - (Optional) Displays a specific MAC address.
<macaddr> - Enter the MAC address here.
static - (Optional) Displays all permanent entries.
aging_time - (Optional) Displays the unicast MAC address aging time.
security - (Optional) Displays the FDB entries that are created by the security module.
If no parameter is specified, system will display the unicast address table.
Restrictions
None.
Example
To display the FDB table:
301