Debug Stp Show Counter - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1:3 Brief
1:4 Brief
1:5 Brief
1:6 Brief
1:7 Brief
1:8 Brief
1:9 Brief
1:10 Brief
1:11 Brief
1:12 Brief
1:13 Brief
1:14 Brief
1:15 Brief
1:16 Brief
1:17 Brief
1:18 Brief
1:19 Brief
1:20 Brief
1:21 Brief
1:22 Brief
1:23 Brief
1:24 Brief
DGS-3120-24TC:admin#
49-4

debug stp show counter

Description
This command is used to display the STP counters.
Format
debug stp show counter {ports [<portlist> | all]}
Parameters
ports - (Optional) Specify the STP ports for display.
<portlist> - Enter the list of port used for this configuration here.
all - Display all port's counters.
If no parameter is specified, display the global counters.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the STP counters for port 9:
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
Brief Brief
488