Show Cfm - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To show the CFM ports:
DGS-3120-24TC:admin#show cfm ports 1:3-1:6
Command: show cfm ports 1:3-1:6
Port State
----- --------
1:3 Enabled
1:4 Enabled
1:5 Enabled
1:6 Disabled
DGS-3120-24TC:admin#

19-14 show cfm

Description
This command is used to show the CFM configuration.
Format
show cfm {[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> | ma_index
<uint 1-4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
Parameters
md - (Optional) Specify the maintenance domain name.
<string 22> - Enter the maintenance domain name used here. This name can be up to 22
characters long.
md_index - (Optional) Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma - (Optional) Specify the maintenance association name.
<string 22> - Enter the maintenance association name used here. This name can be up to
22 characters long.
ma_index - (Optional) Specify the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
mepid - (Optional) Specify the MEP ID.
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and
8191.
mepname - (Optional) Specify the MEP name.
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
194