D-Link DGS-3120-24PC Manual page 126

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#show egress_flow_meter
Command: show egress_flow_meter
Flow Meter Information
------------------------------------------------------------------------------
Profile ID:1 Aceess ID:1
CIR(Kbps):1000
Action:
Conform : Permit
Exceed : Drop
Violate : Drop
------------------------------------------------------------------------------
Profile ID:1 Aceess ID:2
CIR(Kbps):1000
Action:
Conform : Permit
Exceed : Permit
Violate : Drop
------------------------------------------------------------------------------
Total Entries: 2
DGS-3120-24TC:admin#
7-8 create port_group
Description
This command is used to create a port group.
Format
create port_group id <value 1-64> name <name 16>
Parameters
id - Specify the port group ID.
<value 1-64> - Enter the port group ID here. This value must be between 1 and 64.
name - Specify the port group name.
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create a port group:
Mode : trTCM / ColorAware
CBS(Kbyte):1000
Mode : srTCM / ColorBlind
CBS(Kbyte):100
Replace DSCP: 60
122
PIR(Kbps):2000
Counter: Enabled
Counter: Enabled
Counter: Disabled
EBS(Kbyte):200
Counter: Enabled
Counter: Enabled
Counter: Disabled
PBS(Kbyte):2000