D-Link DGS-3120-24PC Manual page 753

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure time:
DGS-3120-24TC:admin#
Command: config time 30jun2003 16:30:30
Success.
DGS-3120-24TC:admin#
84-7 config time_zone
Description
This command is used to configure time zone of the device.
Format
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
Parameters
operator - (Optional) Specify the operator of time zone.
[+ | -] - Specify that time should be added or subtracted to or from the GMT.
hour - (Optional) Specify the hour of time zone.
<gmt_hour 0-13> - Enter the hour value of the time zone here. This value must be between 0
and 13.
min - (Optional) Specify the minute of time zone.
<minute 0-59> - Enter the minute value of the time zone here. This value must be between 0
and 59.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure time_zone:
DGS-3120-24TC:admin# config time_zone operator + hour 2 min 30
Command: config time_zone operator + hour 2 min 30
Success.
DGS-3120-24TC:admin#
config time 30jun2003 16:30:30
749