Debug Stp Clear Counter - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin# debug stp show counter ports 1:9
Command: debug stp show counter ports 1:9
STP Counters
--------------------------------------
Port 1:9 :
Receive:
Total STP Packets
Configuration BPDU
TCN BPDU
RSTP TC-Flag
RST BPDU
Discard:
Total Discarded BPDU
Global STP Disabled
Port STP Disabled
Invalid packet Format
Invalid Protocol
Configuration BPDU Length : 0
TCN BPDU Length
RST BPDU Length
Invalid Type
Invalid Timers
DGS-3120-24TC:admin#
49-5

debug stp clear counter

Description
This command is used to clear the STP counters.
Format
debug stp clear counter [ports <portlist> | all]
Parameters
ports - Specify the port range.
<portlist> - Enter the list of port used for this configuration here.
all - Clears all port counters.
Restrictions
Only Administrator-level users can issue this command.
Example
To clear all STP counters on the Switch:
Transmit:
: 0 Total STP Packets
: 0 Configuration BPDU : 0
: 0 TCN BPDU
: 0 RSTP TC-Flag
: 0 RST BPDU
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
489
: 0
: 0
: 0
: 0