Chapter 41 Layer 2 Protocol Tunneling (L2Pt) Command List - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 41 Layer 2 Protocol Tunneling
enable l2protocol_tunnel
disable l2protocol_tunnel
config l2protocol_tunnel ports [<portlist> | all] type [uni tunneled_protocol [{stp | gvrp |
protocol_mac [01-00-0C-CC-CC-CC | 01-00-0C-CC-CC-CD]}(1) | all] {threshold <value 0-
65535>} | nni | none]
show l2protocol_tunnel {[uni | nni]}
41-1 enable l2protocol_tunnel
Description
This command is used to enable the Layer 2 protocol tunneling function.
Format
enable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the Layer 2 protocol tunneling function:
DGS-3120-24TC:admin#enable l2protocol_tunnel
Command: enable l2protocol_tunnel
Success.
DGS-3120-24TC:admin#
41-2 disable l2protocol_tunnel
Description
This command is used to disable the L2PT function globally on the Switch.
Format
disable l2protocol_tunnel
(L2PT) Command List
414