Debug Show Status - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display debug information of JWAC:
DGS-3120-24TC:admin#debug show jwac auth_info
Command: debug show jwac auth_info
ACL Index Bitmap DB (jwac_db_acl_bmp):
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
Internal TCP Port Number (jwac_internal_port_bitmap):
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
Connection DB:
No Host
Current AUTH DB (_jwac_db_nodes):
No Host
Ports AUTH Info: (_jwac_db_nodes)
port mac
----- ------------------ -------- ---------- ----------- -----------
JWAC Web data (jwac_web_auth_result_list):
CTRL+C ESC q Quit

22-10 debug show status

Description
This command is used to display the specified module's debug status.
Format
debug show status {module <module_list>}
Parameters
module – (Optional) Specify the module to be displayed.
<module_list> - enter the module to be displayed.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the all modules' debug state:
00 00 00 00
00 00 00 00
00 00 00 00
FF FF FF FF
FF FF FF FF
FF FF FF FF
FF FF FF FF
FF FF FF FF
FF FF FF FF
FF FF FF
state last_bytes authing_cnt authed_cnt
SPACE n Next Page ENTER
233
00 00 00 00 00
00 00 00 00 00
00 00
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
Next Entry a All
00 00 00 00 00
00 00 00 00 00
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
FF FF FF FF FF
00
00
FF
FF
FF
FF
FF
FF